PCB design services involve specialized activities aimed at creating an optimum printed circuit board layout using CAD software and other specialized PCB design tools. There are different kinds of PCBs and the process for each one may vary a bit. Regardless of the type of board or layout, though, it's always going to be roughly the same multi-stage designing process that begins with schematic capture.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
Another important thing that has to be decided in the designing stage is about the characteristics of the board. The most critical thing is deciding the technique used for creating traces and mounting components. The most widely used solution is surface-mount technology.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
Designing new boards is just one part of the services offered by PCB designers. They may also be asked to perform other functions such as evaluate designs, along with the components used and their footprints. Clients sometimes ask them to assist with procurement of prototypes and check for availability and pricing information against the BOM contents.
Certain PCB design services are required even after the client receives the finished product. Customers may seek changes to the design immediately or in future, and reorders are quite common. It works the other way around too, with designers asked to reverse engineer gerber files or film artwork into a netlist format or schematic. This is often required when complex circuits require heavy modifications at the most basic level.
Designers typically require that clients should provide basic information regarding three key matters. The most important of them is the schematic, but it may alternatively be in the form of a netlist file. This is a file containing connectivity details and component descriptions.
Another thing the client is required to provide is the bill of materials (BOM) specifying each component used and its footprint. Designers are sometimes asked to help with component footprint capture. The client is also expected to provide the board outline. Once they have the schematic or netlist, BOM and the board outline, the designer should be able to do the rest.
Starting from the netlist/schematic, the process is taken further using techniques including library development, signal integrity and EMI checks, stress analysis, thermal simulation, etc. The series of intermediate steps ends with the creation of the gerber file. This format is the preferred one used by the electronics industry to transfer finished PCB images that are ready to be used in the manufacturing stage.
Designers must be able to work on complex solutions involving everything from digital and analog to RF circuits and mixed PCBs. The board can be designed as per specifications as a single or double sided board, or a multi-layered one. The size is also likely to vary, and so will other factors such as component quantities and pin densities.
Another important thing that has to be decided in the designing stage is about the characteristics of the board. The most critical thing is deciding the technique used for creating traces and mounting components. The most widely used solution is surface-mount technology.
Components on boards that use this technology have their end caps soldered on the same side as the components themselves. This is hugely different from earlier techniques such as through-hole boards. The leads of components in such older boards were inserted through holes and soldered on to the traces on the other side.
Designing new boards is just one part of the services offered by PCB designers. They may also be asked to perform other functions such as evaluate designs, along with the components used and their footprints. Clients sometimes ask them to assist with procurement of prototypes and check for availability and pricing information against the BOM contents.
Certain PCB design services are required even after the client receives the finished product. Customers may seek changes to the design immediately or in future, and reorders are quite common. It works the other way around too, with designers asked to reverse engineer gerber files or film artwork into a netlist format or schematic. This is often required when complex circuits require heavy modifications at the most basic level.
About the Author:
Read more about PCB Design Services For Electronics Manufacturers visiting our website.
Aucun commentaire:
Enregistrer un commentaire